 |
|
|
Quad
Eight Coronados
Four 2-channel units in "lunch-box" style
flight cases. These units mix the AM-10 discrete amplifier
with standard op-amps. With mic and line in, > +30dBu output
level and 3-band switched EQ, phase rev and ouput level control.
|
| |
Klien
and Hummel UE-100
re-tubed, re-capped and fully restored. One channel of 4-band
EQ - 14 tubes!!! |
|
Quad
Eight Compressors
top - AM2B pair racked, input/ output transformers
added, external metering
bottom - CL22 pair racked, input/ output transformers added,
external metering |
|
Quad
Eight 312
'second generation' racking of the Quad Eight 'Star
Wars' EQ312 modules. These have a new mic-pre transformer,
high Z DI input and pad, phase and phantom added.
Racked pairs of these are now available to purchase
ALL SOLD!
read the story
of these modules |
| |
Neve
33415 Modules
Pair racked with stepped gain and output trim control. Pad,
phase, phantom via JLM 'go-between' pcb |
|
Auditronics
110 modules
another pair racked, IC's upgraded, re-capped and transformer
balanced outputs added |
|
NEVE
1093
racked with ouput 'fader' and Sifam metering |
|
MCI-500
Series
single channel strip racked, ready to rock! |
 |
|
|
Inside is very busy...note the copper
ground buss running along the bottom rear of the case. |
Neve
V Series channel strips
The Mic / Line Input section with compressor / gate and EQ
/ Insert Send - Return Modules were pulled from the channel
strip. New dress plates were made and 2 channel's worth installed
into a 2unit rack case. These Neve V series upon which the
Neve Prism Racks are based and are the children of the Neve
51 Series consoles are seriously under-rated units. Often
left behind in the madness that surrounds the 1073 etc etc
modules. |
| 
|
Siemens
/ Telefunken Modules
V276 Mic-pre's
w295B three band EQ's
racked as separate modules with a 'pre to EQ' linking switch
and the VU's able to be selected to read either the pre or
EQ module. |
| |
MCI
500 Series Racks
various version of these have been built over
the past 12 months. The MCI-500 console utilised a unique
ap-amp that runs on +/- 36V rails giving a +30dB internal
and external signal handling ability.
complete info
here |
|
Hill
J Series Console strips
These feature a mic / line input and a fixed eight band graphic
EQ.
Two strips were cut down, a balanced line input added, an
output level pot included and transformer output added. |
| 
|
Audix
modules
4 x 35102 and 2 x AM6 modules per rack. The 35102 modules
were modified to provide separate mic and line inputs and
a DI input added.
Custom racked for Pnau and Floating Point Studios |
 |
|
